深圳机械光开关多通道1*N光开关厂家直销光电开关-通信设备-网络安防/通信广电-产品库-全球货源网

通信设备

首页 > 产品库 > 网络安防/通信广电 > 通信设备

深圳机械光开关多通道1*N光开关厂家直销光电开关

2019-01-19 18:14964

信息概况

价格：￥200.00/只
起订：5只
供应：10000只

发送询价

深圳市光派通信技术有限公司

进入商家主页

品牌：iseelink型号：1*N类别：全光交换用途：陆地适用范围：光通讯电压：5V功率：500W外形尺寸：135*40*32mm重量：0.5kg详细说明

1. 产品简介

光开关是一种光路控制器件，起着控制光路和转换光路的作用。在光通信应用中具有重要作用。光开关主要应用于：光传输系统中的多路光监控、LAN多光源/探测器自动换接以及光传感多点动态监测系统；光测试系统中用于光纤、光器件、网络和野外工程光缆测试；光器件装调。1×N光开关能将一路输入路由选择切换至N路输出路由中的一路。

2. 产品特点

Ø 具有插入损耗小，切换速度快等特点。

3. 技术参数

型号	OSW1xN
工作波长	1260 ～ 1650nm
测试波长	1310nm / 1550 nm
插入损耗	Typ: ＜0.8 dB，Max: ＜1.2 dB
重复性	≤±0.02 dB
回波损耗	≥50dB
串扰	≥55dB
波长相关损耗	≤0.25
偏振相关损耗	≤0.05
切换时间	≤ 10ms（相邻顺序切换）
光纤类型	SM（9/125um）
连接器形式	FC/PC
监控端口	RJ45、RS-232
工作电源	AC: 85 ～ 264 V（50/60Hz）或 DC: 36 ～ 72 V
工作温度	-10 ～ + 60℃
存储温度	-40 ～ + 80°C

4.引脚定义

DB-9 male connector (max.1×16)

Pin No.	Signal Name	I / O	Description
1	D0	Input	TTL, Channel selection bit 0
2	D1	Input	TTL, Channel selection bit 1
3	D2	Input	TTL, Channel selection bit 2
4	D3	Input	TTL, Channel selection bit 3
5	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
6	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
7	ERROR	Output	TTL, Error (High=Error, Low=No error)
8	GND	Input	Ground
9	+5VDC	Input	5.0±5% VDC Power Supply (max 800mA)

DB-15 male connector (max.1×32)

Pin No.	Signal Name	I / O	Description
2	D0	Input	TTL, Channel selection bit 0
3	D1	Input	TTL, Channel selection bit 1
4	D2	Input	TTL, Channel selection bit 2
5	D3	Input	TTL, Channel selection bit 3
6	D4	Input	TTL, Channel selection bit 4
11	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
8	ERROR	Output	TTL, Error (High=Error, Low=No error)
1, 9	GND	Input	Ground
15	+5VDC	Input	5.0±5% VDC Digital power supply (max 50mA)
12	VM	Input	5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA)
14	ISP	Input	TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground.
10, 13	NA

DB-15 male connector (max.1×64)

Pin No.	Signal Name	I / O	Description
2	D0	Input	TTL, Channel selection bit 0
3	D1	Input	TTL, Channel selection bit 1
4	D2	Input	TTL, Channel selection bit 2
5	D3	Input	TTL, Channel selection bit 3
6	D4	Input	TTL, Channel selection bit 4
10	D5	Input	TTL, Channel selection bit 5
11	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
8	ERROR	Output	TTL, Error (High=Error, Low=No error)
1, 9	GND	Input	Ground
15	+5VDC	Input	5.0±5% VDC Digital power supply (max 50mA)
12	VM	Input	5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA)
14	ISP	Input	TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground.
13	NA

DB-15 male connector (max.1×128)

Pin No.	Signal Name	I / O	Description
2	D0	Input	TTL, Channel selection bit 0
3	D1	Input	TTL, Channel selection bit 1
4	D2	Input	TTL, Channel selection bit 2
5	D3	Input	TTL, Channel selection bit 3
6	D4	Input	TTL, Channel selection bit 4
10	D5	Input	TTL, Channel selection bit 5
13	D6	Input	TTL, Channel selection bit 6
11	/RESET	Input	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7	/READY	Output	TTL, Ready (High=Not ready, Low=Ready)
8	ERROR	Output	TTL, Error (High=Error, Low=No error)
1, 9	GND	Input	Ground
15	+5VDC	Input	5.0±5% VDC Digital power supply (max 50mA)
12	VM	Input	5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA)
14	ISP	Input	TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground.

Channel Selection Table

Max Channel	Input								Active Channel
Max Channel	/RESET	D6	D5	D4	D3	D2	D1	D0	Active Channel
N=16	0	x	x	x	x	x	x	x	0 reset
	1	x	x	x	0	0	0	0	COM → 1
		x	x	x	0	0	0	1	COM → 2
		x	x	x	0	0	1	0	COM → 3
		x	x	x	…	…	…	…	…
		x	x	x	1	1	1	1	COM → 16

N=128	0	x	x	x	x	x	x	x	0 reset
	1	0	0	0	0	0	0	0	COM → 1
		0	0	0	0	0	0	1	COM → 2
		0	0	0	0	0	1	0	COM → 3
		…	…	…	…	…	…	…	…
		1	1	1	1	1	1	1	COM → 128

5.光路图

6.规格尺寸

联系方式

关闭