品牌:倍加福型号:KCD0-SD-Ex1.1245设备类型:网管交换机传输速率:10Mbps传输模式:全/半双工自适应工作协议:第二层交换机是否支持网管功能:网管型交换机有无内置防火墙:有端口结构:固定端口模块化插槽数:1端口数:657546背板带宽:5437馈电电流:4746馈电电压:48678功率:678W网络标准:678状态指示灯:788456平均无故障时间:6573产品认证:367环境条件:768外形尺寸:367mm重量:3657kg
General specifications
Signal type | Digital Output |
Functional safety related parameters
Safety Integrity Level (SIL) | SIL 3 |
Supply
Rated voltage | loop powered |
Power dissipation | < 1 W |
Input
Connection side | control side |
Connection | terminals 5, 6 |
Rated voltage | 19 ... 30 V DC |
Current | ≤ 72 mA at Ui = 19 V, ≤ 50 mA at Ui = 30 V with 265 Ω output load ≤ 45 mA at Ui = 19 V, ≤ 31 mA at Ui = 30 V with shorted output ≤ 14 mA at Ui = 19 V, ≤ 11 mA at Ui = 30 V no load at output |
Inrush current | ≤ 200 mA after 100 µs |
Output
Connection side | field side |
Connection | terminals 1+, 2- |
Internal resistor | max. 238 Ω |
Current | ≤ 45 mA |
Voltage | ≥ 12 V |
Open loop voltage | min. 22.7 V |
Output rated operating current | 45 mA |
Output signal | These values are valid for the rated operating voltage 19 ... 30 V DC. |
Energized/De-energized delay | single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs |
Galvanic isolation
Input/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
Indicators/settings
Display elements | LED |
Labeling | space for labeling at the front |
Directive conformity
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Conformity
Electromagnetic compatibility | NE 21 |
Degree of protection | IEC 60529 |
Protection against electrical shock | UL 61010-1 |
Ambient conditions
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 100 g |
Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas
EU-Type Examination Certificate | baseEFA 06 ATEX 0170 |
| Marking | II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I |
| Output | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Voltage | 25.2 V |
| Current | 110 mA |
| Power | 693 mW |
Input | |
| Maximum safe voltage | 250 V (Attention! The rated voltage can be lower.) |
Certificate | PF 06 CERT 0971 X |
| Marking | II 3G Ex nA IIC T4 Gc |
Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |